No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display sta-offline-delay configuration

display sta-offline-delay configuration


The display sta-offline-delay configuration command displays the STA offline delay configuration.


display sta-offline-delay configuration




All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view the STA offline delay configuration.


# Display the STA offline delay configuration.
<HUAWEI> display sta-offline-delay configuration
Enable switch                         : disable
Aging time(s)                         : 180
Full station reject switch            : disable
Max number                            : 2048
Table 11-85  Description of the display sta-offline-delay configuration command output



Enable switch

Whether to enable the STA offline delay function.

To configure the parameter, run the sta-offline-delay enable command.

Aging time(s)

Aging time of the STA offline delay state

To configure the parameter, run the sta-offline-delay aging-time command.

Full station reject switch

Whether to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.

To configure the parameter, run the sta-offline-delay full-sta-reject enable command.

Max number

Maximum number of STAs that are allowed to delay going offline.

To configure the parameter, run the sta-offline-delay max-number command.

Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123973

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next