No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
capwap dtls psk-mandatory-match enable

capwap dtls psk-mandatory-match enable

Function

The capwap dtls psk-mandatory-match enable command enables an AP to establish a Datacom Transport Layer Security (DTLS) session with an AC using the default pre-shared key.

The undo capwap dtls psk-mandatory-match enable command disables an AP to establish a Datacom Transport Layer Security (DTLS) session with an AC using the default pre-shared key.

By default, an AP is disabled to establish a DTLS session with an AC using the default pre-shared key.

Format

capwap dtls psk-mandatory-match enable

undo capwap dtls psk-mandatory-match enable

Parameters

None.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

When a new AP is added to the WLAN or the passwords of the AP and AC are different (for example, the password of the AC is changed but the AP is not online), you can enable the AP to perform DTLS sessions with the AC using the default pre-shared key. After three DTLS session failures, the AP notifies the AC of DTLS sessions using the default pre-shared key. In this way, a CAPWAP tunnel is established between the AP and the AC.

Example

# Enable the AP to establish a DTLS session with the AC using the default pre-shared key.

<HUAWEI> system-view
[HUAWEI] capwap dtls psk-mandatory-match enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126480

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next