No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
operating-class-profile

operating-class-profile

Function

The operating-class-profile command creates an operating class profile or displays the view of an existing operating class profile.

The undo operating-class-profile command deletes an operating class profile.

By default, no operating class profile is configured in the system.

Format

operating-class-profile name profile-name

undo operating-class-profile { name profile-name | all }

Parameters

Parameter

Description

Value

name profile-name

Indicates the name of the operating class profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").

all

Indicates to delete all operating class profiles.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The operating class profile is used to configure the operating class indication of AP in on the hotspot2.0 network. When a STA accesses the network, it can obtain channel information used to access a Wi-Fi frequency from AP so that the STA can set up a connection.

Example

# Create an operating class profile named operating-class-profile1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] operating-class-profile name operating-class-profile1
[HUAWEI-wlan-op-class-prof-operating-class-profile1] 
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126585

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next