No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap blacklist

display ap blacklist

Function

The display ap blacklist command displays the AP blacklist.

Format

display ap blacklist

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays APs in the blacklist. These APs are not allowed to go online on the AC. If an AP is online on the AC but is in the blacklist, the AP is forced to log out.

Example

# Display the AP blacklist.

<HUAWEI> display ap blacklist
--------------------------------------------------------------------------------
ID     MAC                                                                      
--------------------------------------------------------------------------------
0      0001-0002-0001
--------------------------------------------------------------------------------
Total: 1 
Table 11-8  Description of the display ap blacklist command output

Item

Description

ID

ID of the MAC address in the AP blacklist. The ID is generated automatically when the MAC address is specified.

MAC

MAC addresses of the APs that are not allowed to connect to the AC.

To add MAC addresses to the AP blacklist, run the ap blacklist command.

Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124027

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next