No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap whitelist

display ap whitelist

Function

The display ap whitelist command displays information about an AP whitelist.

Format

display ap whitelist { mac | sn }

Parameters

Parameter

Description

Value

sn

Displays serial numbers (SNs) in the AP whitelist.

-

mac

Displays MAC addresses in the AP whitelist.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When the AP authentication mode is set to MAC authentication or SN authentication using the ap auth-mode command, you can run the ap whitelist command to configure an AP whitelist. Only APs on the whitelist are allowed to go online. To check information about APs in the whitelist, run the display ap whitelist command.

Example

# Display MAC addresses in the AP whitelist.

<HUAWEI> display ap whitelist mac
--------------------------------------------------------------------------------
Index  MAC
--------------------------------------------------------------------------------
0      1047-80b1-56a0
1      0023-0024-0080
2      dcd2-fc9d-0bb0
--------------------------------------------------------------------------------
Total: 3
Table 11-42  Description of the display ap whitelist mac command output

Item

Description

Index

Index.

MAC

MAC address of an AP.

To add a MAC address to the AP whitelist, run the ap whitelist mac ap-mac1 [ to ap-mac2 ] command.

# Display SNs in the AP whitelist.

<HUAWEI> display ap whitelist sn
--------------------------------------------------------------------------------
Index  SN
--------------------------------------------------------------------------------
0      210235449210CB000011
1      S0001
2      210235568010D1000032
--------------------------------------------------------------------------------
Total: 3
Table 11-43  Description of the display ap whitelist sn command output

Item

Description

Index

Index.

SN

SN of an AP.

To add an SN to the AP whitelist, run the ap whitelist sn ap-sn1 [ to ap-sn2 ] command.

Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124944

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next