No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
softgre-profile (WLAN view)

softgre-profile (WLAN view)


The softgre-profile command creates a soft GRE profile and displays the soft GRE profile view, or displays the view of an existing soft GRE profile.

The undo softgre-profile command deletes a soft GRE profile.

By default, no soft GRE profile is available in the system.


softgre-profile name profile-name

undo softgre-profile { name profile-name | all }





name profile-name

Specifies the name of a soft GRE profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Deletes all soft GRE profiles.



WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Before configuring soft GRE tunnel forwarding, create a soft GRE profile and bind the profile to a VAP profile so that the soft GRE tunnel configuration can take effect.

To configure parameters in a soft GRE profile, run the softgre-profile command to enter the soft GRE profile view first. When a soft GRE profile is not required, delete it.

Follow-up Procedure

Run the forward-mode command in the VAP profile view to bind the soft GRE profile to the VAP profile.


The soft GRE profile referenced by a VAP profile cannot be deleted. To delete the soft GRE profile, unbind it from the VAP profile first.


# Create the soft GRE profile soft1 and display the view of the profile.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] softgre-profile name soft1
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126427

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next