No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-group (AP provisioning view)

ap-group (AP provisioning view)


The ap-group command configures an AP group.

The undo ap-group command restores the default AP group.

By default, no AP group is configured.


ap-group ap-group

undo ap-group


Parameter Description Value
ap-group Specifies the group that an AP joins. The AP group must exist.


AP provisioning view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the group that an AP joins is changed, and the change is delivered to the AP, the AP automatically restarts and joins the new group.

Follow-up Procedure

Run the commit command to deliver configuration to APs and restart the APs to make the configuration take effect.


# Change the group that the AP joins to group ap-new-group.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] provision-ap
[HUAWEI-wlan-provision-ap] ap-group ap-new-group
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 112910

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next