No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update update-filename

ap update update-filename

Function

The ap update update-filename command configures the upgrade file name for APs of a specified type.

The undo ap update update-filename command deletes the upgrade file name for APs of a specified type.

Format

ap update update-filename filename ap-type type-id [ ap-group ap-group-name ]

undo ap update update-filename ap-type type-id [ ap-group ap-group-name ]

Parameters

Parameter

Description

Value

ap-type type-id

Specifies the AP type ID.

The value is an integer that ranges from 0 to 255.

filename

Specifies the AP upgrade file name.

The value is a string of 1 to 255 case-sensitive characters. Ensure that the file name is the same as the actual upgrade file name and has the extension .bin.

ap-group ap-group-name

Specifies an AP group.

The AP group must already exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

If you specify ap-group ap-group-name, the command configures the upgrade file name only for APs of the specified type and in the specified group.

Run the ap update multi-load ap-type command to upgrade APs of the same type in batches.

Example

# Set the upgrade file name for APs with the type ID 19 to FitAP6050DN_V200R010C00.bin.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update update-filename FitAP6050DN_V200R010C00.bin ap-type 19
Warning: If an AP is performing the automatic upgrade, the AP will be upgraded to the latest version. Continue?[Y/N]:y
Warning: If AP update mode is AC-mode, update-file's default path is flash:/. Continue?[Y/N]:y
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126395

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next