No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The ap-regroup command changes the group that an AP joins.


ap-regroup { ap-name ap-name | ap-id ap-id } new-group new-group-name





ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) to separate AP IDs or use hyphens (-) to indicate continuous AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20.

new-group new-group-name

Specifies the name of the new group to which the AP is added.

The AP group must exist.


WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If the current AP group is not applicable to an AP or the AP is added to an incorrect group, you can run this command to delete the AP from the current AP group and add the AP to a new AP group.


The AP group has been created using the ap-group command.

Configuration Impact

Changing the group of an AP will restart the AP and interrupt services. Exercise caution when you run the command.


# Change the group that an AP joins to the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] quit
[HUAWEI-wlan-view] ap-regroup ap-name 1047-80b1-56a0 new-group group1
Warning: This operation may cause AP reset. If the country code changes, it will clear channel, power and antenna gain configuration
s of the radio, Whether to continue? [Y/N]:y 
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116858

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next