No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mac-address ap-all

display mac-address ap-all

Function

The display mac-address ap-all command displays MAC address entries on all APs.

Format

display mac-address mac-address [ verbose ] ap-all

Parameters

Parameter

Description

Value

mac-address

Displays MAC address entries on all APs.

The value is in H-H-H format, where H is a hexadecimal number of 1 to 4 digits.

verbose

Displays detailed information of the dynamic entries. If verbose is not specified, brief information of the dynamic entries is displayed.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When errors or attacks occur on the network, you can run the display mac-address ap-all command to locate the attack sources based on the displayed MAC addresses.

Example

# Display dynamic MAC address entries of all APs.

<HUAWEI> display mac-address 00e0-fc09-bcf9 ap-all
Info: Waiting for AP response...done.
-------------------------------------------------------------------------------
MAC Address    VLAN/VSI        Learned-From               Type        AP ID
-------------------------------------------------------------------------------
00e0-fc09-bcf9    1/-          GigabitEthernet0/0/0       dynamic     1
00e0-fc09-bcf9    1/-          GigabitEthernet0/0/0       dynamic     0
-------------------------------------------------------------------------------
Total: 2
Table 11-57  Description of the display mac-address mac-address ap-all command output

Item

Description

MAC Address MAC address.
VLAN/VSI ID of the VLAN or name of the VSI that a MAC address belongs to.
Learned-From Interface on which the MAC address is learned.
Type Type of a MAC address entry.
AP ID AP ID.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 124712

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next