No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap data-collection enable

ap data-collection enable


The ap data-collection enable command enables an AC to buffer AP data.

The undo ap data-collection enable command restores the default settings.

By default, an AC is disabled from buffering AP data.


ap data-collection enable

undo ap data-collection enable




WLAN view

Default Level

2: Configuration level

Usage Guidelines

The AC needs to query performance statistics (such as AP and radio performance statistics, and STA association information on APs) from APs. The ap data-collection enable command can enable an AC to periodically query data on APs and buffer obtained data. Upon next data query, the AC can directly search for data in the buffer but does not need to wait for APs to return data. This greatly reduces timeout for querying AP-related statistics.

If there are a large number of APs and users on the AC, this function may occupy many memory resources and affect performance. Therefore, you are advised to disable this function when statistics query is not required.

After the undo ap data-collection enable command is executed, the AC stops periodically obtaining data from APs. Historical data in the buffer is not updated. To query latest statistics, enable this function again.


# Enable an AC to buffer AP data.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap data-collection enable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 122968

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next