No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap manufacturer-config

ap manufacturer-config

Function

The ap manufacturer-config command restores the factory settings of APs.

Format

ap manufacturer-config { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Specifies the name of the AP, factory settings of which need to be restored.

The AP name must already exist.

ap-mac ap-mac

Specifies the MAC address of the AP, factory settings of which need to be restored.

The AP's MAC address must already exist.

ap-id ap-id

Specifies the ID of the AP, factory settings of which need to be restored.

The AP ID must already exist.

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

When a configuration error occurs on the AP, you can run this command to clear AP configurations.

After restoring factory settings, the AP is reset and configurations are restored to factory settings.

Example

# Restore the factory settings of AP N1-2.
<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap manufacturer-config ap-name N1-2
Warning: Reset AP to the manufacturing default configuration, continue?[Y/N]:y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114574

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next