No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nai-realm

nai-realm

Function

The nai-realm command configures a network access identifier (NAI) realm.

The undo nai-realm command deletes a NAI realm.

By default, no NAI realm is configured.

Format

nai-realm realm-name realm-name [ eap-method-type eap-method-type [ eap-authen-id eap-authen-id eap-authen-para eap-authen-para ] ]

undo nai-realm realm-name realm-name [ eap-method-type eap-method-type [ eap-authen-id eap-authen-id ] ]

Parameters

Parameter

Description

Value

realm-name realm-name

Specifies a NAI realm name.

The value is a string of 1 to 63 characters in compliance with RFC4282. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").

eap-method-type eap-method-type

Specifies an EAP authentication mode for a NAI realm.

Enumerated value:
  • eap-aka: EAP-AKA authentication
  • eap-sim: GSM Subscriber Identity Modules
  • eap-tls: EAP-TLS
  • eap-ttls: EAP-TTLS

eap-authen-id eap-authen-id

Specifies an EAP authentication ID for a NAI realm.

The value is an integer that ranges from 0 to 255.

eap-authen-para eap-authen-para

Specifies the EAP authentication parameter of a NAI realm.

The value is an integer that ranges from 0 to 255.

Views

NAI realm profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you configure a NAI realm, terminals can access the configured operator network.

Precautions

  • If you configure the same name for NAI realms, the NAI realm with fuzzy command configuration will overwrite the NAI realm with exact command configuration.

    For example, the nai-realm realm-name attwireless.com command configuration will overwrite the nai-realm realm-name attwireless.com eap-method-type eap-aka command configuration, and the nai-realm realm-name attwireless.com eap-method-type eap-aka command configuration will overwrite the nai-realm realm-name attwireless.com eap-method-type eap-aka eap-authen-id 1 eap-authen-para 1 command configuration.

  • NAI realms are deleted according to the longest matching rule.

    For example, the NAI realm configured using the nai-realm realm-name attwireless.com command cannot be deleted using the undo nai-realm realm-name attwireless.com eap-method-type eap-aka command.

Example

# Configure NAI realm attwireless.com.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] nai-realm-profile name nai-realm-profile1
[HUAWEI-wlan-nai-realm-prof-nai-realm-profile1] nai-realm realm-name attwireless.com
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116162

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next