No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
report enable

report enable

Function

The report enable command enables APs to send Bluetooth packets.

The undo report enable command disables APs from sending Bluetooth packets.

By default, an AP is disabled from sending Bluetooth packets.

Format

report enable

undo report enable

Parameters

None

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When the Bluetooth tag location or Bluetooth data transparent transmission function is configured on an AP, run the report enable command to enable the AP to send the Bluetooth packets to a location server or an AC.

Example

# Enable APs to send Bluetooth packets.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ble-profile name huawei
[HUAWEI-wlan-ble-prof-huawei] report enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126992

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next