No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap update ftp-server max-connect-number

ap update ftp-server max-connect-number

Function

The ap update ftp-server command configures the maximum number of APs that can be upgraded simultaneously in FTP mode.

The undo ap update ftp-server command restores the default maximum number of APs that can be upgraded simultaneously in FTP mode.

By default, a maximum of 50 APs can be upgraded simultaneously in FTP mode.

Format

ap update ftp-server max-connect-number max-connect-number

undo ap update ftp-server max-connect-number

Parameters

Parameter

Description

Value

max-connect-number

Specifies the maximum number of APs that can be upgraded simultaneously.

The value is an integer that ranges from 1 to 64.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When APs are upgraded in FTP mode, you can configure the value of max-connect-number to change the maximum number of APs that can be upgraded simultaneously.
  • If the number of APs to be upgraded is equal to or smaller than max-connect-number, all APs can be upgraded simultaneously.

  • If the number of APs to be upgraded is larger than max-connect-number, only the specified number of APs can be upgraded simultaneously. After the specified number of APs are upgraded, the remaining APs are upgraded automatically until all APs are upgraded. The number of APs that are upgraded at a time cannot exceed the value of max-connect-number.

Precautions

An external FTP server can be used, which is recommended. The AC can also function as the FTP server.
  • When an external FTP server is used, the maximum number of APs that can be upgraded simultaneously is the configured max-connect-number.
  • If an AC is used as the FTP server, a maximum of five APs can be upgraded simultaneously even if the specified number is larger than five.

    When the AC functions as the FTP server, run the ap update ftp-server max-connect-number max-connect-number command to set the maximum number of APs that can be upgraded simultaneously. The value of max-connect-number is an integer ranging from 1 to 5. During the upgrade, a maximum of 1 to 5 APs can be upgraded at a time until all APs are upgraded.

    If the configured number of APs to be upgraded simultaneously is larger than five, an error message will be displayed after the first five APs are upgraded. The remaining APs cannot be automatically upgraded. You have to repeat the command until all APs are upgraded.

    When the AC functions as an FTP server, the number of VTY users is the reduced number of APs that can be upgraded simultaneously.

Example

# Set the maximum number of APs that can be upgraded simultaneously in FTP mode to 10.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap update ftp-server max-connect-number 10
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114033

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next