No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
operating-class-profile (Hotspot2.0 profile view)

operating-class-profile (Hotspot2.0 profile view)

Function

The operating-class-profile command binds the specified operating class profile to a Hotspot2.0 profile view.

The undo operating-class-profile command unbinds the specified operating class profile from a Hotspot2.0 profile view.

By default, no operating class profile is bound to a Hotspot2.0 profile view.

Format

operating-class-profile profile-name

undo operating-class-profile

Parameters

Parameter

Description

Value

profile-name

Indicates the name of the operating class profile.

The value must be the name of an existing operating class profile.

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA accesses a Hotspot2.0 network, it can obtain channel information used to access a Wi-Fi frequency from the AP so that the STA can set up a connection. Before binding an operating class profile to a Hotspot2.0 profile, you need to run the operating-class-profile command to create an operating class profile and run the operating-class-indication command in the profile view to configure an operating class indication.

Example

# Bind the operating class profile operating-class-profile1 to the hotspot profile.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] operating-class-profile operating-class-profile1
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115534

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next