No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wds-profile radio

wds-profile radio


The wds-profile radio command binds a WDS profile to an AP group or AP.

The undo wds-profile radio command deletes a WDS profile from an AP group or AP.

By default, no WDS profile is bound to an AP group or AP.


wds-profile profile-name radio { all | radio-id }

undo wds-profile radio { all | radio-id }






Specifies the name of the WDS profile bound to an AP or AP group.

The WDS profile must exist.


Binds a WDS profile to all AP radios.



Binds a WDS profile to a specified AP radio.

The radio ID must exist.


AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After a WDS profile is bound to an AP or AP group, the AP radio will generate a WDS VAP to provide WDS services. The WDS VAP provides hidden SSIDs for WDS nodes to set up connections.


A WDS profile has been created and configured properly.


Among the VAPs created after a WDS profile is bound to an AP radio, the VAPs with the WLAN IDs 13 and 14 cannot be occupied.

An AP radio can only have one WDS profile bound.

Since the WLAN WDS and Mesh functions are mutually exclusive, the WDS and Mesh profiles cannot be applied to an AP radio at the same time.


# Bind the WDS profile test to radio 0 of APs in the AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] wds-profile test radio 0
Warning: This action may cause service interruption. Continue?[Y/N]y
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126218

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next