No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
service-slot

service-slot

Function

The service-slot command specifies non-X series interface cards for a WLAN work group.

The undo service-slot command deletes non-X series interface cards from a WLAN work group.

By default, no non-X series interface card is configured for a WLAN work group.

Format

service-slot { service-slot-id [ to service-slot-id2 ] } &<1-10>

undo service-slot { service-slot-id [ to service-slot-id2 ] } &<1-10>

Parameters

Parameter Description Value
service-slot-id Specifies the slot ID of the non-X series interface card in a WLAN work group.
  • On a standalone switch where CSS is not enabled, service-slot-id is an integer and must be set according to the device configuration.
  • In a CSS, service-slot-id is in the format cluster ID and slot ID, for example, 1/2.

Views

WLAN work group

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can use this command to configure non-X series interface cards for a WLAN work group. APs can connect to the AC through the non-X series interface cards.

Precautions

A non-X series interface card can join only one WLAN work group.

Example

# Add non-X series interface cards in slots 1, 2, and 3 to WLAN work group 1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] wlan work-group 1
[HUAWEI-wlan-work-group1] service-slot 1 to 3
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116613

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next