No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
access-user syslog-restrain period

access-user syslog-restrain period

Function

The access-user syslog-restrain period command sets the period of system log suppression.

The undo access-user syslog-restrain period command restores the default period of system log suppression.

By default, the period of system log suppression is 300s.

Format

access-user syslog-restrain period period

undo access-user syslog-restrain period

Parameters

Parameter

Description

Value

period

Specifies the period of system log suppression.

The value is an integer that ranges from 60 to 604800, in seconds.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

When a STA is authenticated or successfully associates with an AP, the AP sends system logs to the NMS server. A system log contains MAC addresses of the STA, AP, and AC, AP name and current time, AC name and current time, and authentication result.

A STA retries continuously after it fails to associate with an AP or pass the authentication. When this occurs, the AC sends a large number of logs in a short time. This results in a high statistics failure rate and degrades the NMS performance. The system log suppression function reduces impact of such logs on the NMS. After the period of system log suppression is set, the AC will send only one system log to the NMS server during the suppression period, reducing the load on the server.

Example

# Set the period of system log suppression to 600s.

<HUAWEI> system-view
[HUAWEI] access-user syslog-restrain period 600
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123348

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next