No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ac protect cold-backup kickoff-station

ac protect cold-backup kickoff-station

Function

The ac protect cold-backup kickoff-station command enables the function of disconnecting STAs in open system authentication mode when an active/standby switchover is implemented between ACs that have dual-link cold backup configured.

The undo ac protect cold-backup kickoff-station command restores the default setting.

By default, STAs using open system authentication remain connected to APs when an active/standby AC switchover is implemented.

Format

ac protect cold-backup kickoff-station

undo ac protect cold-backup kickoff-station

Parameters

None

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

An active/standby switchover between two ACs that have dual-link cold backup configured causes a short service interruption.
  • STAs not using open system authentication are disconnected from APs and need to go online again after the active/standby switchover.
  • By default, STAs using open system authentication remain connected to APs and do not need to go online again after the active/standby switchover. You can run the ac protect cold-backup kickoff-station command to configure the STAs to be disconnected when an active/standby AC switchover is implemented.

Example

# Enable the function of disconnecting STAs in open system authentication mode when an active/standby switchover is implemented between ACs that have dual-link cold backup configured.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ac protect cold-backup kickoff-station
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127702

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next