No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv4-address-avail

ipv4-address-avail

Function

The ipv4-address-avail command configures available types of IPv4 addresses on a Hotspot2.0 network.

The undo ipv4-address-avail command deletes available types of IPv4 addresses on a Hotspot2.0 network.

By default, no available type of IPv4 addresses is configured.

Format

ipv4-address-avail { not-available | available | port-restricted [ single-nat | double-nat ] | private { single-nat | double-nat } | unknown }

undo ipv4-address-avail

Parameters

Parameter

Description

Value

not-available

Indicates that IPv4 addresses are not available.

-

available

Indicates that IPv4 addresses are available.

-

port-restricted [ single-nat | double-nat ]
Indicates port restricted IPv4 addresses are available.
  • single-nat: Single-NATed and port-restricted IPv4 addresses are available.
  • single-nat: Double-NATed and port-restricted IPv4 addresses are available.

-

private { single-nat | double-nat }
Indicates that private IPv4 addresses are available.
  • single-nat: Single-NATed private IPv4 addresses are available.
  • double-nat: Double-NATed private IPv4 addresses are availables.

-

unknown

Indicates that availability of the IPv4 address type is not known.

-

Views

Hotspot2.0 profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When user terminals connect to a Hotspot2.0 network, Hotspot2.0 can transfer available IPv4 address types as ANQP parameters to the user terminals through APs. In this way, the user terminals can know the IP address types they can obtain after connecting to the network.

Example

# Set IPv4 addresses to available in hotspot2.0 profile hotspot.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] hotspot2-profile name hotspot
[HUAWEI-wlan-hotspot2-prof-hotspot] ipv4-address-avail available
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114032

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next