No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The vap-profile command binds a VAP profile to a radio.

The undo vap-profile command unbinds a VAP profile from a radio.

By default, no VAP profile is bound to a radio.


vap-profile profile-name wlan wlan-id radio { radio-id | all } [ service-vlan { vlan-id vlan-id | vlan-pool pool-name } ]

undo vap-profile profile-name wlan wlan-id radio { radio-id | all }

radio { radio-id | all } is supported only in the AP group view and AP view.






Specifies the name of a VAP profile.

The VAP profile must exist.

wlan wlan-id

Specifies the WLAN ID of a VAP.

The value is an integer that ranges from 1 to 16.

  • The WLAN ID for the WDS service can be 13 or 14.
  • The WLAN ID for the Mesh service is 16.
  • The WLAN ID for the offline management VAP configuration is 15 or an integer that ranges from 1 to 12.
  • For the AP2030DN, each radio supports a maximum of eight VAPs. If the value of wlan-id exceeds 8, the configuration cannot take effect and the AP cannot generate wireless signals.


Specifies a radio.



Specifies a radio ID.

The value is an integer that ranges from 0 to 2.

Three radios are available only on the AP4030TN, AP4051TN, and AP8050TN-HD.


Specifies all radios.



Specifies a service VLAN.


vlan-id vlan-id

Specifies a VLAN ID.

The VLAN ID must exist.

vlan-pool pool-name

Specifies a VLAN pool name.

The VLAN pool name must exist.


AP group view, AP view, AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you create a VAP profile using the vap-profile (WLAN view) command, bind it to a radio so that the VAP profile can take effect.

In some scenarios, users hop to configure only one VAP for all APs that use different service VLANs. To simplify configuration, you can configure the service-vlan parameter to define a service VLAN when binding a VAP profile. A user-defined service VLAN has a higher priority than that configured using the service-vlan command.


After a VAP profile is bound to a radio, parameter settings in the VAP profile apply to the radio using the profile.


# Create the VAP profile vap1 and bind it to AP group group1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] quit
[HUAWEI-wlan-view] ap-group name group1
[HUAWEI-wlan-ap-group-group1] vap-profile vap1 wlan 1 radio 0
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115859

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next