No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
connection-capability

connection-capability

Function

The connection-capability command sets whether Hotspot2.0 networks support common IP protocols and ports.

The undo connection-capability command restores the default setting.

By default, no supported protocol is specified in a connection capability profile.

Format

connection-capability { esp | icmp | tcp-ftp | tcp-http | tcp-pptp-vpn | tcp-ssh | tcp-tls-vpn | tcp-voip | udp-ike2-4500 | udp-ike2-500 | udp-voip } { on | off }

undo connection-capability { esp | icmp | tcp-ftp | tcp-http | tcp-pptp-vpn | tcp-ssh | tcp-tls-vpn | tcp-voip | udp-ike2-4500 | udp-ike2-500 | udp-voip }

Parameters

Parameter

Description

Value

esp Sets the supported protocol to ESP and port number to 0. -
icmp Sets the supported protocol to ICMP and port number to 0. -
tcp-ftp Sets the supported protocol to FTP and port number to 20. -
tcp-http Sets the supported protocol to HTTP and port number to 80. -
tcp-pptp-vpn Sets the protocol for VPN services to PPTP and port number to 1723. -
tcp-ssh Sets the supported protocol to SSH. -
tcp-tls-vpn Sets the supported protocol to the TLS VPN protocol and port number to 443. -
tcp-voip Sets the supported protocol to the TCP VoIP protocol and port number to 5060. -
udp-ike2-4500 Sets the supported protocol to the IKEv2 protocol and port number to 4500. -
udp-ike2-500 Sets the supported protocol to the IKEv2 protocol and port number to 500. -
udp-voip Sets the supported protocol to the UDP VoIP protocol and port number to 5060. -
on Supports specified IP protocols and ports. -
off Indicates that specified IP protocols and ports are not supported. -

Views

Connection capability profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the connection-capability command to set whether Hotspot2.0 networks support common IP protocols and ports.

You can use the connection-capability command to set multiple supported protocols at the same time.

Example

# Set the supported protocol to ICMP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] connection-capability-profile name connection-capability-profile1
[HUAWEI-wlan-co-cap-prof-connection-capability-profile1] connection-capability icmp on
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113731

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next