No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-patch update update-filename

ap-patch update update-filename

Function

The ap-patch update update-filename command specifies the patch file name for APs of a specified type.

The undo ap-patch update update-filename command cancels the patch file name configured for APs of a specified type.

Format

ap-patch update update-filename filename ap-type type-id [ ap-group ap-group-name ]

undo ap-patch update update-filename ap-type type-id [ ap-group ap-group-name ]

Parameters

Parameter

Description

Value

ap-type type-id

Specifies an AP type ID.

The AP type ID must exist.

filename

Specifies the name of a patch file.

The value is a string of 1 to 255 case-sensitive characters. Ensure that the file name is the same as the actual patch file name, with a file name extension of .pat.

ap-group ap-group-name

Specifies an AP group.

The AP group must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

After ap-group ap-group-name is specified, the patch file name is configured only for APs of a specified type in this AP group.

After configuring the AP patch file name, you can batch load the patch for APs of the same type using the ap–patch update multi-load ap-type command.

Example

# Set the patch file name of APs with the type ID of 19 to FitAP6050DN_V200R010C00SPC500SPH100.pat.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-patch update update-filename FitAP6050DN_V200R010C00SPC500SPH100.pat ap-type 19
Warning: If an AP is performing the automatic upgrade, the AP will be upgraded to the latest version. Continue?[Y/N]:y
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115500

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next