No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mobility-group

display mobility-group

Function

The display mobility-group command displays configurations of a mobility group.

Format

display mobility-group { name group-name | all }

Parameters

Parameter

Description

Value

name group-name

Specifies the name of a mobility group.

The mobility group name must already exist.

all

Indicates all mobility groups.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mobility-group command to view configurations of a mobility group.

Example

# Display configurations of the mobility group huawei.

<HUAWEI> display mobility-group name huawei
--------------------------------------------------------------------------------
State        IP address                       Description                       
--------------------------------------------------------------------------------
normal       192.168.10.1                     -                                 
normal       192.168.10.2                     -                                 
fault        192.168.10.3                     -                                 
--------------------------------------------------------------------------------
Total: 3 
Table 11-134  Description of the display mobility-group command output
Item Description

State

AC state.
  • normal: The link between the AC and Master Controller is normal.
  • fault: The link between the AC and Master Controller is disconnected.

IP address

AC's IP address.

Description

Description of the AC.

# Display configurations of all mobility groups.

<HUAWEI> display mobility-group all
-------------------------------------------------------------------------------------------                                        
Group name                                                                                                                         
-------------------------------------------------------------------------------------------                                        
a                                                                                                                                  
mo                                                                                                                                 
-------------------------------------------------------------------------------------------                                        
Total: 2    
Table 11-135  Description of the display mobility-group all command output
Item Description

Group name

Mobility group name.

Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114158

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next