No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
private report-protocol

private report-protocol

Function

The private report-protocol command sets a protocol type for APs to report information.

The undo private report-protocol command restores the default protocol type used by APs to report information.

By default, an AP uses UDP to reports information.

Format

private report-protocol { udp | http | https ssl-policy ssl-policy }

undo private report-protocol

Parameters

Parameter Description Value
udp Sets the protocol type to UDP. -
http Sets the protocol type to HTTP. -
https Sets the protocol type to HTTPS. -
ssl-policy ssl-policy Specifies the name of an SSL policy. The value is a string of 1 to 31 case-sensitive characters without spaces or question marks (?).

Views

Location profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When an AP is connected to a Cloud4Wi server, the protocol type must be set to HTTP or HTTPS for the AP to report information to the Cloud4Wi server.

Prerequisites

When the protocol type is set to HTTPS, an SSL policy must have been created and the AP has been configured to report STA location information through an AC.

Example

# Set the protocol type to HTTP for APs to report information.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] location-profile name huawei
[HUAWEI-wlan-location-prof-huawei] private report-protocol http
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116861

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next