No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe high-inrush enable (AP system profile view)

poe high-inrush enable (AP system profile view)

Function

The poe high-inrush enable command configures an interface to allow high inrush current during power-on.

The undo poe high-inrush enable command configures an interface not to allow high inrush current during power-on.

By default, interfaces do not allow high inrush current during power-on.

Format

poe high-inrush enable

undo poe high-inrush enable

Parameters

None.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

High inrush current is generated when a non-standard PD is powered on. In this case, the PSE cuts off the power of the PD to protect itself. If the PSE is required to provide power for the PD, the PSE must allow high inrush current.

Precautions

The high inrush current may damage components of a PD.

This command takes effect only on the AP7052DN, AP7152DN, AP7050DN-E, AP4050DN-E, AP4050DN-HD, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.

Example

# Enable the AP to allow high inrush current during power-on.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] poe high-inrush enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 117263

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next