No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
igmp-snooping group-bandwidth (AP system profile view)

igmp-snooping group-bandwidth (AP system profile view)

Function

The igmp-snooping group-bandwidth command configures the bandwidth of global multicast groups on an AP.

The undo igmp-snooping group-bandwidth command deletes the bandwidth of global multicast groups on an AP.

By default, the bandwidth of global multicast groups is not configured on an AP.

Format

igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address bandwidth bandwidth-value

undo igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address

Parameters

Parameter Description Value

start-group-address start-group-address

Specifies the start multicast group address.

The value is in dotted decimal notation.

end-group-address end-group-address

Specifies the end multicast group address.

The value is in dotted decimal notation.

bandwidth bandwidth-value

Specifies the bandwidth of multicast groups.

The value is an integer that ranges from 1 to 100000, in kbps.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure the bandwidth of multicast groups in an AP system profile according to the actual bandwidth of a multicast program. This configuration takes effect for the APs or AP groups to which this AP system profile is bound. When users request to order this multicast program, the AC collects statistics on the current multicast bandwidth of the VAP according to the bandwidth of global multicast groups configured for the AP, and compares the current bandwidth with the configured maximum bandwidth to determine whether to allow users to order this multicast program.

Precautions

You can configure the bandwidth for a maximum of 32 multicast group address segments. Addresses in one address segment must be different from those in another address segment. The configured address segments must contain valid multicast program addresses.

Example

# Set the bandwidth to 100 kbps for multicast group address segment from 224.0.1.0 to 224.255.255.255.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] igmp-snooping group-bandwidth start-group-address 224.0.1.0 end-group-address 224.255.255.255 bandwidth 100
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113384

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next