No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ucc-profile (VAP profile view)

ucc-profile (VAP profile view)


The ucc-profile command binds a UCC profile to a VAP profile.

The undo ucc-profile command unbinds a UCC profile from a VAP profile.

By default, no UCC profile is bound to a VAP profile.


ucc-profile profile-name

undo ucc-profile






Specifies the name of a UCC profile.

The UCC profile name must exist.


VAP profile view

Default Level

2: Configuration level

Usage Guidelines

After a UCC profile is created, run the ucc-profile command to bind the UCC profile to a VAP profile so that the actions in the UCC profile take effect.


# Create a UCC profile named test and bind the UCC profile to the VAP profile vap1.

<HUAWEI> system-view
[HUAWEI] ucc-profile name test
[HUAWEI-ucc-prof-test] quit
[HUAWEI] wlan
[HUAWEI-wlan-view] vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1] ucc-profile test
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115917

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next