No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap run-info

display ap run-info

Function

The display ap run-info command displays running status of an AP.

Format

display ap run-info { ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Displays running status of the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays running status of the AP with a specified ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

This command displays AP running status. You can run this command to monitor an AP in real time.

Prerequisites

The AP works properly.

Example

# Display running status of AP huawei.
<HUAWEI> display ap run-info ap-name huawei  
--------------------------------------------------------------------------------
AP type                       : AP7030DE
Country code                  : CN
Software version              : V200R010C00
Hardware version              : Ver.A
BIOS version                  : 271
BOM version                   : 001
Memory size(MB)               : 256
Flash size(MB)                : 64
Manufacture                   : Huawei Technologies Co., Ltd.
Software vendor               : Huawei Technologies Co., Ltd.
Online time(ddd:hh:mm:ss)     : 6H:56M:26S
Run time(ddd:hh:mm:ss)        : 6H:59M:51S
IP address                    : 192.168.109.252
IP mask                       : 255.255.255.0
Gateway                       : 192.168.109.1
DNS server                    : 0.0.0.0
GigabitEthernet port 0
  Port speed(Mbps)            : 1000
  Port speed mode             : auto
  Port duplex                 : full
  Port duplex mode            : auto
  Port state                  : down
  STP down recovery time(ddd:hh:mm:ss)        : - 
GigabitEthernet port 1
  Port speed(Mbps)            : 1000
  Port speed mode             : auto
  Port duplex                 : full
  Port duplex mode            : auto
  Port state                  : up
  STP down recovery time(ddd:hh:mm:ss)        : - 
Card status               : slot 1: -, slot 2: -, slot 3: - 
--------------------------------------------------------------------------------
Table 11-29  Description of the display ap run-info command output

Item

Description

AP type

AP type.

Country code

Country code.

Software version

Software version of an AP.

Hardware version

Hardware version of an AP.

BIOS version

BIOS version of an AP.

BOM version

BOM version of an AP.

Memory size(MB)

Memory size of an AP, in MB.

Flash size(MB)

Flash memory size of an AP, in MB.

Manufacture

Manufacturer of an AP.

Software vendor

AP software manufacturer.

Online time(ddd:hh:mm:ss)

AP online duration.

Run time(ddd:hh:mm:ss)

Running duration of an AP.

IP address

AP IPv4 address.

IP mask

Mask of an AP.

Gateway

Gateway IP address of an AP.

DNS server

IP address of the DNS server.

XGigabitEthernet port number

ID of the AP's XGigabitEthernet port.

This item is displayed only for an AP with a XGigabitEthernet port.

MultiGE port number

ID of the AP's MultiGE port.

This item is displayed only for an AP with a XGigabitEthernet port.

GigabitEthernet port number

ID of the AP's Ethernet interface.

Port speed(Mbps)

Rate on the upstream Ethernet interface, in Mbit/s.

Port speed mode

Rate mode of the upstream Ethernet interface, including automatic and non-automatic negotiation modes.

Port duplex

Duplex type of the upstream Ethernet interface, including full duplex and half duplex.

Port duplex mode

Duplex mode of the upstream Ethernet interface, including automatic and non-automatic negotiation modes.

Port state

AP interface status.

  • down: indicates that the interface is disabled.
  • up: indicates that the interface is enabled.
  • *down: indicates that the interface is shut down.

STP down recovery time(ddd:hh:mm:ss)

Remaining recovery time of the STP.

Card status

IoT card status.

  • -: indicates that the IoT card is not in position.
  • present: indicates that the IoT card is in position.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116048

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next