No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sfn-roam report-interval

sfn-roam report-interval

Function

The sfn-roam report-interval command sets an interval at which RUs report STA RSSIs.

The undo sfn-roam report-interval command restores the default interval at which RUs report STA RSSIs.

By default, RUs report STA RSSIs to the central AP at an interval of 400 milliseconds.

Format

sfn-roam report-interval report-interval-value

undo sfn-roam report-interval

Parameters

Parameter

Description

Value

report-interval-value

Specifies an interval for RUs to report STA RSSIs.

The value is an integer that ranges from 200 to 1000, in milliseconds.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

The interval at which RUs report STA RSSIs helps you adjust the roaming sensitivity. A shorter interval indicates a higher sensitivity. A large value causes the slow roaming switchover, affecting user experience. A small value causes frequent roaming switchovers, affecting system performance. This interval must be smaller than the decision period for agile distributed SFN roaming.

Example

# Set the interval for RUs to report the STA RSSI to 500 milliseconds.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] rrm-profile name wlan-rrm
[HUAWEI-wlan-rrm-prof-wlan-rrm] sfn-roam report-interval 500
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115623

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next