No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sfn-roam roam-check better-times

sfn-roam roam-check better-times

Function

The sfn-roam roam-check better-times command sets the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU.

The undo sfn-roam roam-check better-times command restores the default number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU.

By default, the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU is 2.

Format

sfn-roam roam-check better-times better-times

undo sfn-roam roam-check better-times

Parameters

Parameter

Description

Value

better-times

Specifies the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU.

The value is an integer that ranges from 1 to 32.

Views

RRM profile view

Default Level

2: Configuration level

Usage Guidelines

You can adjust the roaming sensitivity by setting the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU. A roaming switchover occurs when the RSSI of a surrounding RU is higher than that of the local RU for the specified times within the roaming decision period. A large value causes the slow roaming switchover, affecting user experience. A small value causes frequent roaming switchovers, affecting system performance.

Example

# Set the number of times the RSSI of agile distributed SFN roaming RUs is higher than that of the local RU to 5.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] rrm-profile name wlan-rrm
[HUAWEI-wlan-rrm-prof-wlan-rrm] sfn-roam roam-check better-times 5
Related Topics
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115394

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next