No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display softgre-tunnel-status

display softgre-tunnel-status

Function

The display softgre-tunnel-status command displays soft GRE tunnel information of an AP.

Format

display softgre-tunnel-status { ap-name ap-name | ap-id ap-id }

Parameters

Parameter

Description

Value

ap-name ap-name

Displays soft GRE tunnel information of the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays soft GRE tunnel information of the AP with a specified ID.

The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display softgre-tunnel-status command to view the soft GRE tunnel status and Keepalive information.

Example

# Display soft GRE tunnel information of the AP area_1.

<HUAWEI> display softgre-tunnel-status ap-name area_1
----------------------------------------------------------------------------------------------------
Destination IP-address                  Status      Keepalive     Request     Response
----------------------------------------------------------------------------------------------------
10.10.1.1                               UP          enable        1           0
----------------------------------------------------------------------------------------------------
Table 11-82  Description of the display softgre-tunnel-status command output

Item

Description

Destination IP-address

Destination address of the soft GRE tunnel.

To configure the parameter, run the destination (soft GRE profile view) command.

Status

Soft GRE tunnel status.

  • DOWN: After the Keepalive detection function is enabled, the status of the soft GRE tunnel is set to DOWN when the device detects that the remote end is unreachable.
  • UP: When the Keepalive detection function is disabled or when the Keepalive detection function is enabled but the device detects that the remote end is reachable, the status of the soft GRE tunnel is set to UP.

Keepalive

Whether the Keepalive detection function is enabled for the soft GRE tunnel.

To configure the parameter, run the keepalive (soft GRE profile view) command.

Request

Number of Keepalive Request packets sent by the AP.

Response

Number of Keepalive Response packets received by the AP.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113709

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next