No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mu-mimo optimize enable

mu-mimo optimize enable

Function

The mu-mimo optimize enable command enables the MU-MIMO optimization function.

The undo mu-mimo optimize enable command disables the MU-MIMO optimization function.

By default, the MU-MIMO optimization function is disabled.

Format

mu-mimo optimize enable

undo mu-mimo optimize enable

Parameters

None

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In an environment with less interference, you can run the mu-mimo optimize enable command to enable the MU-MIMO optimization function to meet requirements for high downlink throughput of the AP. The expected effect may fail to be achieved in some scenarios.

Precautions

Only the 802.11ac wave2 APs support MU-MIMO on 5 GHz radios.

Prerequisites

The MU-MIMO function has been enabled using the undo mu-mimo disable command.

Example

# Enable the MU-MIMO optimization function in the SSID profile test.
<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ssid-profile name test
[HUAWEI-wlan-ssid-prof-test] undo mu-mimo disable
[HUAWEI-wlan-ssid-prof-test] mu-mimo optimize enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123068

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next