No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mesh vap

display mesh vap

Function

The display mesh vap command displays information about a Mesh VAP.

Format

display mesh vap { ap-group ap-group-name | ap-id ap-id [ radio radio-id ] | ap-name ap-name [ radio radio-id ] } [ mesh-id mesh-id ]

display mesh vap { all | mesh-id mesh-id }

Parameters

Parameter

Description

Value

ap-group ap-group-name

Displays information about all Mesh VAPs in a specified AP group.

The AP group must exist.

ap-id ap-id

Displays information about Mesh VAPs on the AP with a specified ID.

The AP ID must exist.

ap-name ap-name

Displays information about Mesh VAPs on the AP with a specified name.

The AP name must exist.

radio radio-id

Displays information about Mesh VAPs of a specified AP radio.

The radio ID must exist.

mesh-id mesh-id

Displays information about Mesh VAPs of a specified Mesh ID.

The Mesh ID must exist.

all

Displays information about all Mesh VAPs.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mesh vap command to view information about a specified Mesh VAP or all Mesh VAPs.

Example

# Display information about all Mesh VAPs.

<HUAWEI> display mesh vap all
WID : WLAN ID                                                                   
------------------------------------------------------------------------------------------------
AP ID AP name        RfID WID  Mesh ID           BSSID           Auth type  Mesh links
------------------------------------------------------------------------------------------------
1     AP2            0    16   mesh              60DE-4474-964F  WPA2-PSK   0
0     AP1            0    16   mesh              60DE-4474-964F  Open       0
------------------------------------------------------------------------------------------------
Total: 2     
Table 11-223  Description of the display mesh vap command output

Item

Description

AP ID

AP ID.

AP name

AP name.

RfID

Radio ID.

WID

WLAN ID of a VAP.

Mesh ID

Mesh ID.

To set a Mesh ID, run the mesh-id command.

BSSID

MAC address of a VAP.

Auth type

Authentication type.

Mesh links

Number of Mesh links.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115174

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next