No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap port

display ap port

Function

The display ap port command displays the AP port status and traffic information.

Format

display ap port { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac }

Parameters

Parameter

Description

Value

all

Displays port status and traffic information of all APs.

-

ap-name ap-name

Displays port status and traffic information of the AP with a specified name.

The AP name must exist.

ap-id ap-id

Displays port status and traffic information of the AP with a specified ID.

The AP ID must exist.

ap-mac ap-mac

Displays port status and traffic information of the AP with a specified MAC address.

The AP's MAC address must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display ap port command to check port status and traffic information of online APs, which facilitates AP port maintenance and management.

Example

# Display port status and traffic information of all APs.

<HUAWEI> display ap port all
Info: Waiting for AP response.
-----------------------------------------------------------------------------------------------------------------------------------
AP-ID Port   Trunk ID    State Speed Duplex TX-Packets       Tx-ErrorPackets  TX-Rate(Kbps) RX-Packets       RX-DropPackets   RX-Rate(Kbps)
-----------------------------------------------------------------------------------------------------------------------------------
0     GE0   0(active)     up    1000  full   9178             0                0             12857            0                1
-----------------------------------------------------------------------------------------------------------------------------------
Printed: 1
Table 11-26  Description of the display ap port command output
Parameter Description

AP-ID

AP ID.

Port

AP port.

Trunk ID

Whether the Eth-Trunk function is configured and whether the RU port is added to an Eth-Trunk.
  • The field outside parentheses indicates the configuration on the AC.
    • 0: The AC is configured to add RU ports to Eth-Trunk 0.
    • -: The AC is not configured to add RU ports to an Eth-Trunk.
  • The field in parentheses indicates the effective configuration on the RU.
    • -: The RU port does not support the Eth-Trunk function.
    • active: The RU port has been added to an Eth-Trunk.
    • inactive: The RU port is not added to an Eth-Trunk.

The entire field is described as follows:

  • 0(active): The RU port is added to Eth-Trunk 0, and this configuration is in effect.
  • 0(inactive): The AC is configured to add RU ports to Eth-Trunk 0, but this configuration takes effect only after a restart. The current RU port is not in an Eth-Trunk.
  • 0(-)The AC is configured to add RU ports to Eth-Trunk 0, but the current RU port does not support the Eth-Trunk function.
  • -(-): The current RU port does not support the Eth-Trunk function, and the AC is not configured to add RU ports to an Eth-Trunk.
  • 0(active): The AC is configured to remove RU ports from an Eth-Trunk, but this configuration takes effect only after a restart. The current RU port is still in an Eth-Trunk.
  • -(inactive): The RU port is configured to leave an Eth-Trunk, and this configuration is in effect.

State

Status of the AP port.
  • down: The AP port is Down.
  • up: The AP port is Up.
  • *down: The interface is shut down.

Speed

Speed of the AP port, in Mbit/s.

Duplex

Duplex mode of the AP port, which includes the half-duplex and full-duplex modes.

TX-Packets

Number of data frames sent by the AP port.

Tx-ErrorPackets

Number of error data frames sent by the AP port.

TX-Rate(Kbps)

Uplink rate of the AP port.

RX-Packets

Number of data frames received by the AP port.

RX-DropPackets

Number of discarded data frames that are received by the AP port.

RX-Rate(Kbps)

Downlink rate of the AP port.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115600

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next