No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap-patch update load

ap-patch update load


The ap-patch update load command loads a patch for a specified AP.

The undo ap-patch update load command uninstalls the patch from a specified AP.


ap-patch update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id } update-filename update-file-name

undo ap-patch update load { ap-name ap-name | ap-mac ap-mac | ap-id ap-id }





ap-name ap-name

Specifies an AP name.

The AP name must exist.

ap-mac ap-mac

Specifies the AP's MAC address.

The specified AP's MAC address must exist.

ap-id ap-id

Specifies an AP ID.

The AP ID must exist.

update-filename update-file-name

Specifies the name of an AP patch file.

The value is a string of 1 to 255 case-sensitive characters. Ensure that the file name is the same as the actual patch file name, with a file name extension of .pat.


WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

When you load the patch for multiple APs of a specified type, a version exception will lead to a long-time patch uninstallation. In this case, before loading the patch in a batch, you can load the patch for a single AP for testing, helping detect any exception in advance and ensuring the success of subsequent batch patch loading.


In the AC upgrade mode, the AP's patch file has been uploaded to theAC. In FTP or SFTP upgrade mode, the AP's patch file has been uploaded to an FTP or SFTP server.

Follow-up Procedure

Run the display ap update status command to check the patch loading progress.


# Load the patch FitAP6050DN_V200R010C00SPC500SPH100.pat for the AP named N1-2.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-patch update load ap-name N1-2 update-filename FitAP6050DN_V200R010C00SPC500SPH100.pat
Info: The current upgrade mode is AC mode, which may affect performance and take a long time. The FTP or SFTP upgrade mode is recommended. Continue? [Y/N]: y
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115653

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next