No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rate-limit client dynamic

rate-limit client dynamic


The rate-limit client dynamic command sets the dynamic rate limit threshold for a single STA in a VAP.

The undo rate-limit client dynamic command restores the default dynamic rate limit threshold of a single STA in a VAP.

By default, the dynamic rate limit threshold of a single STA in a VAP is 16 Mbit/s.


rate-limit client dynamic rate-value

undo rate-limit client dynamic





rate-value Specifies the rate limit of packets. The value is an enumerated value, which can be 8, 16, or 32, in Mbit/s. The default value is 16 Mbit/s.


Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a STA downloads or uploads large files on the live network, network access of other STAs may be affected.

After dynamic rate limiting is enabled, the device determines whether to perform three-phase rate limiting for wireless users depending on whether the air interface is congested. This improves network experience of wireless users.


If static rate limiting has been enabled, static rate limiting takes precedence over dynamic rate limiting.


# Set the dynamic rate limit threshold for a single STA in a VAP.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1 
[HUAWEI-wlan-traffic-prof-p1] undo rate-limit client dynamic disable
[HUAWEI-wlan-traffic-prof-p1] rate-limit client dynamic 32
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 112865

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next