No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
unicast-suppression auto-detect (AP system profile view)

unicast-suppression auto-detect (AP system profile view)

Function

The unicast-suppression auto-detect command configures the rate limit for unknown unicast packets during intelligent flow control.

The undo unicast-suppression auto-detect command restores the default rate limit for unknown unicast packets during intelligent flow control.

By default, the rate limit for unknown unicast packets is 128 pps.

Format

unicast-suppression auto-detect packets packets

undo unicast-suppression auto-detect packets

Parameters

Parameter

Description

Value

packets packets

Specifies the rate limit for unknown unicast packets.

The value is an integer that ranges from 64 to 1024, in pps.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

When there are a large number of broadcast, multicast, and unknown unicast packets, the CPU becomes busy processing these packets. When the traffic rate reaches the rate limit for intelligent traffic control, the device limits the rates of broadcast, multicast, and unknown unicast packets. You can run this command to specify a rate limit as required.

Example

# Set the rate limit for unknown unicast packets during intelligent flow control to 300 pps.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-system-profile name system1
[HUAWEI-wlan-ap-system-prof-system1] unicast-suppression auto-detect packets 300
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 114089

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next