No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mesh-profile

display mesh-profile

Function

The display mesh-profile command displays reference or configuration information about Mesh profiles.

Format

display mesh-profile { all | name profile-name }

Parameters

Parameter

Description

Value

all

Displays reference information about all Mesh profiles.

-

name profile-name

Displays reference information about a specified Mesh profile.

The Mesh profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mesh-profile command to view the number of times a Mesh profile is referenced or configuration information of a specified Mesh profile.

Example

# Display reference information about all Mesh profiles.

<HUAWEI> display mesh-profile all
--------------------------------------------------------------------------------
Profile name                         Reference                                  
--------------------------------------------------------------------------------
default                              0                                          
test                                 2                                          
--------------------------------------------------------------------------------
Total: 2                                                                        
Table 11-219  Description of the display mesh-profile all command output

Item

Description

Profile name

Mesh profile name.

To create a Mesh profile, run the mesh-profile command.

Reference

Number of times a Mesh profile is referenced.

# Display information about the Mesh profile test.

<HUAWEI> display mesh-profile name test
--------------------------------------------------------------------------------
Mesh handover profile            : 
Security profile                 : default-mesh                                 
Mesh ID                          : HUAWEI-WLAN-MESH                             
Max link number                  : 32                                           
Link RSSI threshold(dBm)         : -90                                          
Link report interval(s)          : 30                                           
Link aging timeout(s)            : 60
FWA switch                       : enable                                       
FWA EDCA mode                    : manual                                       
DHCP trust port                  : enable                                       
ND trust port                    : enable
Priority map trust               : DSCP                                         
Priority map mode                : DSCP map 802.11e                             
                                   0-7 map 0                                    
                                   8-15 map 1                                   
                                   16-23 map 2                                  
                                   24-31 map 3                                  
                                   32-39 map 4                                  
                                   40-47 map 5                                  
                                   48-55 map 6                                  
                                   56-63 map 7                                  
Client mode                      : disable                                            
Beacon 2.4G rate(Mbps)           : 1                                            
Beacon 5G rate(Mbps)             : 6                                            
--------------------------------------------------------------------------------
Mesh WMM EDCA client parameters:                                                
--------------------------------------------------------------------------------
       ECWmax  ECWmin  AIFSN  TXOPLimit                                         
AC_VO  10      4       7      0                                                 
AC_VI  4       3       2      94                                                
AC_BE  10      4       3      0                                                 
AC_BK  10      4       7      0                                                 
--------------------------------------------------------------------------------
Table 11-220  Description of the display mesh-profile name command output

Item

Description

Mesh handover profile

Mesh handover profile bound to a Mesh profile.

To bind a Mesh handover profile to a Mesh profile, run the mesh-handover-profile (Mesh profile view) command.

Security profile

Security profile bound to a Mesh profile.

To bind a security profile to a Mesh profile, run the security-profile (Mesh profile view) command.

Mesh ID

Mesh ID of a Mesh profile.

To set a Mesh ID, run the mesh-id command.

Max link number

Maximum number of Mesh links allowed on an AP.

To set the maximum number of Mesh links, run the max-link-number command.

Link RSSI threshold

RSSI threshold of a Mesh link.

To set the RSSI threshold of a Mesh link, run the link-rssi-threshold command.

Link report interval

Interval for reporting Mesh link information.

To set the interval for reporting Mesh link information, run the link-report-interval command.

Link aging timeout

Aging time of a Mesh link.

To set the aging time of a Mesh link, run the link-aging-time command.

FWA switch

FWA status in a Mesh profile.
  • enable: The FWA is enabled.
  • disable: The FWA is disabled.

To configure FWA, run the fwa enable command.

FWA EDCA mode

EDCA mode.
  • auto: indicates the automatic mode.
  • manual: indicates the manual mode.

To set the EDCA mode, run the fwa wmm edca-mode command.

DHCP trust port

Whether to enable a DHCP trusted port in a Mesh profile.
  • enable: A DHCP trusted port is enabled.
  • disable: A DHCP trusted port is disabled.

To enable a DHCP trusted port in a Mesh profile, run the dhcp trust port (Mesh profile view) command.

ND trust port

Whether to enable an ND trusted port in a Mesh profile.
  • enable: An ND trusted port is enabled.
  • disable: An ND trusted port is disabled.

To enable an ND trusted port in a Mesh profile, run the nd trust port (Mesh profile view) command.

Priority map trust

Priority mapping trusted by the Mesh air interface.

To configure the parameter, run the priority-map trust (Mesh profile view) command.

Priority map mode

Mapping from DSCP priorities to 802.11e user priorities on the Mesh air interface.

To configure the parameter, run the priority-map dscp (Mesh profile view) command.

Client mode

Whether to enable the Mesh client mode.

  • enable: The Mesh client mod is enabled.
  • disable: The Mesh client mod is disabled.

Beacon-2g-rate

Transmit rate of 2.4 GHz Beacon frames configured in the WDS profile.

To configure the parameter, run the beacon-2g-rate command.

Beacon-5g-rate

Transmit rate of 5 GHz Beacon frames configured in the WDS profile.

To configure the parameter, run the beacon-5g-rate command.

AC_VO

AC_VO packets.

AC_VI

AC_VI packets.

AC_BE

AC_BE packets.

AC_BK

AC_BK packets.

ECWmax

Exponent form of the maximum contention window (ECWmax). ECWmin and ECWmax determine the average backoff time.

To configure the parameter, run the fwa wmm edca-client command.

ECWmin

Exponent form of the minimum contention window (ECWmin). ECWmin and ECWmax determine the average backoff time.

To configure the parameter, run the fwa wmm edca-client command.

AIFSN

Arbitration inter frame spacing number (AIFSN), which determines the channel idle time.

To configure the parameter, run the fwa wmm edca-client command.

TXOPLimit

Transmission opportunity limit (TXOPLimit), which determines the maximum duration in which a STA can occupy a channel. A larger TXOPLimit value indicates a longer duration to occupy a channel.

To configure the parameter, run the fwa wmm edca-client command.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127285

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next