No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-load-balance dynamic disable

sta-load-balance dynamic disable


The sta-load-balance dynamic disable command disables the dynamic load balancing function.

The undo sta-load-balance dynamic disable command enables the dynamic load balancing function.

By default, the dynamic load balancing function is enabled.


sta-load-balance dynamic disable

undo sta-load-balance dynamic disable




RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Static load balancing limits the maximum number of AP radios to 16 and allows only radios on the same frequency band to join a load balancing group. Additionally, a load balancing group needs to be manually specified. Dynamic load balancing overcomes the limitations of static load balancing.

In dynamic load balancing mode, a STA sends a broadcast Probe Request frame to scan available APs. The APs that receive the Probe Request frame all report the STA information to the AC. The AC adds these APs to a load balancing group, and then uses a load balancing algorithm to determine whether to allow access from the STA.


# Disable dynamic load balancing.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] rrm-profile name default
[HUAWEI-wlan-rrm-prof-default] sta-load-balance dynamic disable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126280

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next