No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
antenna-output

antenna-output

Function

The antenna-output command configures an output mode of a 2.4G/5G antenna.

The undo antenna-output command restores the default output mode of a 2.4G/5G antenna.

By default, a 2.4G/5G antenna uses split output.

Format

antenna-output { split | combine }

undo antenna-output

Parameters

Parameter

Description

Value

split Indicates the split mode of a 2.4G/5G antenna. -
combine Indicates the combination mode of a 2.4G/5G antenna. -

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In train-ground communication scenarios, you can use the antenna-output split command to configure the split mode of a 2.4G/5G antenna. The antenna uses either the 2.4 GHz radio to provide wireless coverage in the carriage, or the 5 GHz radio to provide wireless bridging between carriages.

In train-ground communication scenarios, you can use the antenna-output combine command to configure the combination mode of a 2.4G/5G antenna. The antenna uses the 2.4 GHz and 5 GHz radios to simultaneously provide wireless bridging between carriages.

Precautions

This command is supported only by APs supporting antenna combination and split modes.

Example

# Configure the combination mode of a 2.4G/5G antenna.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name apsys1
[HUAWEI-wlan-ap-system-prof-apsys1] antenna-output combine
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115339

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next