No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spectrum-analysis enable

spectrum-analysis enable

Function

(AP group radio view) The spectrum-analysis enable command enables spectrum analysis on a specified radio in an AP group.

(AP group radio view) The undo spectrum-analysis enable command disables spectrum analysis on a specified radio in an AP group.

(AP radio view) The spectrum-analysis enable command enables spectrum analysis on a specified AP radio.

(AP radio view) The undo spectrum-analysis enable command restores the AP radio configuration to that in the AP group radio view.

By default, spectrum analysis is disabled on an AP radio.

Format

spectrum-analysis enable

undo spectrum-analysis enable

Parameters

None

Views

AP radio view, AP group radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

If interference exists on a WLAN, enable spectrum analysis on some APs of the WLAN to implement spectrum scanning, sampling, and analysis on the wireless signals. The spectrum analysis function helps identify non-Wi-Fi interference on the WLAN and locate non-Wi-Fi devices so that radio calibration can be implemented.

Precautions

If the WDS or Mesh service is configured on a radio, the command cannot be executed in the radio view.

Example

# Enable spectrum analysis on radio 0 of the AP with ID 1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-id 1 
[HUAWEI-wlan-ap-1] radio 0
[HUAWEI-wlan-radio-1/0]spectrum-analysis enable
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 115376

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next