No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The ssid command sets a service set identifier (SSID) for an SSID profile.

The undo ssid command deletes the SSID of an SSID profile.

By default, the SSID HUAWEI-WLAN is configured in an SSID profile.


ssid ssid

undo ssid






Specifies the name of an SSID.

The value is a string of 1 to 32 case-sensitive characters. It supports Chinese characters or Chinese + English characters, without tab characters.

To start an SSID with a space, you need to encompass the SSID with double quotation marks (" "), for example, " hello". The double quotation marks occupy two characters. To start an SSID with a double quotation mark, you need to add a backslash (\) before the double quotation mark, for example, \"hello. The backslash occupies one character.


You can only use a command editor of the UTF-8 encoding format to edit Chinese characters.

SSIDs containing Chinese characters cannot be displayed on STAs that do not support the UTF-8 encoding format.


SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An SSID specifies a wireless network. When you search for available wireless networks on your wireless terminal, SSIDs are displayed to identify the available wireless networks.


When you configure an SSID containing Chinese characters, do not delete characters by pressing the Delete button if you want to modify the SSID that has been entered. Otherwise, the SSID will contain garbled characters after the configuration. In this case, run the ssid command to reconfigure the SSID.


# Set the SSID to wlan-net in the SSID profile ssid1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ssid-profile name ssid1
[HUAWEI-wlan-ssid-prof-ssid1] ssid wlan-net
Related Topics
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126801

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next