No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate manual startup

calibrate manual startup


The calibrate manual startup command manually triggers radio calibration.


calibrate manual startup [ { ap-group group-name }&<1-4> | ap-id ap-list ]





ap-group group-name

Specifies an AP group.


A maximum of four AP groups can be specified.

The AP group must exist.

ap-id ap-list

Specifies AP IDs in a batch.

The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) or hyphens (-) to separate AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20.


WLAN view

Default Level

2: Configuration level

Usage Guidelines

To implement radio calibration instantly, you can run the calibrate enable { auto [ interval interval-value [ start-time start-time ] ] | manual | schedule time time-value } command to enable radio calibration and then run the calibrate manual startup command to manually trigger radio calibration.

You can select an AP group or list to implement radio calibration for specified APs.


# Manually trigger radio calibration.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] calibrate enable auto
[HUAWEI-wlan-view] calibrate manual startup
Warning: The operation may cause business interruption, Continue? [Y/N]:y
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 123030

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next