No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
deny-threshold

deny-threshold

Function

The deny-threshold command configures the maximum number of times an AP rejects association requests of a STA for a static load balancing group.

The undo deny-threshold command restores the default maximum number of times an AP rejects association requests of a STA for a static load balancing group.

By default, the maximum number of times an AP rejects association requests of a STA is 3 for a static load balancing group.

Format

deny-threshold deny-threshold

undo deny-threshold

Parameters

Parameter

Description

Value

deny-threshold

Specifies the maximum number of times an AP rejects association requests of a STA.

The value is an integer that ranges from 1 to 10.

Views

Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the deny-threshold command to set the maximum number of times an AP rejects association requests of a STA for a static load balancing group. When a STA requests to associate with an AP radio in the static load balancing group, the AP rejects the association request of the STA if traffic is not balanced among radios in the group. When the number of consecutive association attempts of the STA exceeds the configured maximum number of rejection times, the AP allows the STA to associate with it regardless of whether traffic is balanced.

Precautions

This command takes effect only in channel-utilization mode.

Example

# Set the maximum number of times an AP rejects association requests of a STA to 8 for the static load balancing group coco.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] sta-load-balance static-group name coco
[HUAWEI-wlan-sta-lb-static-coco] deny-threshold 8
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 116451

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next