No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize sta-bridge-forward disable

traffic-optimize sta-bridge-forward disable


The traffic-optimize sta-bridge-forward disable command forbids an air interface to forward packets to bridging terminals.

The undo traffic-optimize sta-bridge-forward disable command cancels of the configuration of forbidding an air interface to forward packets to bridging terminals.

By default, an air interface is allowed to forward packets to bridging terminals.


traffic-optimize sta-bridge-forward disable

undo traffic-optimize sta-bridge-forward disable




Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Some terminals on the wireless network can provide bridging functions. The terminals associate with APs with their MAC addresses and connect to multiple Layer 3 wired devices in the downlink direction. The connected Layer 3 wired devices can also obtain IP addresses and forward traffic through the APs. The APs consider that the associated terminals have multiple IP addresses. You can run the command to forbid air interfaces to forward packets to bridging terminals. This can reduce the number of packets transmitted on the air interfaces and improve the air interface performance.


# Forbid an air interface to forward packets to bridging terminals in the traffic profile p1.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] traffic-profile name p1
[HUAWEI-wlan-traffic-prof-p1] traffic-optimize sta-bridge-forward disable
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 126475

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next