No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset ap unauthorized record

reset ap unauthorized record


The reset ap unauthorized record command clears information about unauthenticated APs.


reset ap unauthorized record




WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run this command to clear information about unauthenticated APs so that removed APs or unauthenticated APs that are physically disconnected from the AC can be cleared. This facilitates collecting statistics and confirmation of unauthenticated APs.


If an AP physically connects to the AC but has not been authenticated, the AP is added in the unauthenticated AP list after you run the reset ap unauthorized record command.


# Clear information about unauthenticated APs.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] reset ap unauthorized record
Warning: Clear unauthorized AP record, continue?[Y/N]:y
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 113099

Downloads: 83

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next