No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hotspot2-profile (VAP profile view)

hotspot2-profile (VAP profile view)


The hotspot2-profile command binds a Hotspot2.0 profile to a VAP profile.

The undo hotspot2-profile command unbinds a Hotspot2.0 profile from a VAP profile.

By default, no Hotspot2.0 profile is bound to a VAP profile.


hotspot2-profile profile-name

undo hotspot2-profile






Specifies the name of a Hotspot2.0 profile.

The Hotspot2.0 profile must exist.


VAP profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can configure network parameters through Hotspot2.0 profiles. After Hotspot2.0 profiles are applied, user terminals can obtain network information from APs and access the networks. After the configuration is complete, bind the Hotspot2.0 profile to a VAP profile to make the configuration take effect.


Hotspot2.0 services require WPA2–802.1X authentication (WPA2 enterprise edition). Ensure that the security policy is set to WPA2–802.1X in the security profile bound to the VAP profile.

When a VAP profile has been bound to a radio, services will be interrupted when a Hotspot2.0 profile is bound to or unbound from the VAP profile, or parameters in the bound Hotspot2.0 profile are modified. Exercise caution when performing this operation.


# Bind Hotspot2.0 profile hotspot to VAP profile vap-profile1.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] vap-profile name vap-profile1
[HUAWEI-wlan-vap-prof-vap-profile1] hotspot2-profile hotspot
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127065

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next