No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R013C00 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wds vap

display wds vap

Function

The display wds vap command displays information about a WDS VAP.

Format

display wds vap { ap-group ap-group-name | ap-id ap-id [ radio radio-id ] | ap-name ap-name [ radio radio-id ] } [ wds-name wds-name ]

display wds vap { all | wds-name wds-name }

Parameters

Parameter

Description

Value

ap-group ap-group-name

Displays information about all WDS VAPs in a specified AP group.

The AP group must exist.

ap-id ap-id

Displays information about WDS VAPs on the AP with a specified ID.

The AP ID must exist.

ap-name ap-name

Displays information about WDS VAPs on the AP with a specified name.

The AP name must exist.

radio radio-id

Displays information about WDS VAPs of a specified AP radio.

The radio ID must exist.

wds-name wds-name

Displays information about WDS VAPs of a specified WDS name.

The WDS name must exist.

all

Displays information about all WDS VAPs.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display wds vap command to display information about a WDS VAP.

Example

# Display information about all WDS VAPs.

<HUAWEI> display wds vap all
WID : WLAN ID                                                                   
-------------------------------------------------------------------------------------
AP ID AP name       RfID WID         WDS name            BSSID          WDS links    
-------------------------------------------------------------------------------------
1     AP2             0  14          wds                 60DE-4474-964D  0           
1     AP2             0  13          wds                 60DE-4474-964C  0           
0     AP1             0  14          wds                 60DE-4476-E36D  1           
0     AP1             0  13          wds                 60DE-4476-E36C  1           
-------------------------------------------------------------------------------------
Total: 4
Table 11-216  Description of the display wds vap command output

Item

Description

AP ID

AP ID.

AP name

AP name.

RfID

Radio ID.

WID

WLAN ID of a VAP.

WDS name

WDS name.

To set a WDS name, run the wds-name command.

BSSID

MAC address of a VAP.

WDS links

Number of WDS links.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065659

Views: 127706

Downloads: 88

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next